diff --git a/sdkconfig b/sdkconfig
index 98ea3ba..0c338d0 100644
--- a/sdkconfig
+++ b/sdkconfig
@@ -130,8 +130,8 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # Audio HAL
 #
-# CONFIG_AUDIO_BOARD_CUSTOM is not set
-CONFIG_ESP_LYRAT_V4_3_BOARD=y
+CONFIG_AUDIO_BOARD_CUSTOM=y
+# CONFIG_ESP_LYRAT_V4_3_BOARD is not set
 # CONFIG_ESP_LYRAT_V4_2_BOARD is not set
 # CONFIG_ESP_LYRATD_MSC_V2_1_BOARD is not set
 # CONFIG_ESP_LYRATD_MSC_V2_2_BOARD is not set
@@ -140,22 +140,63 @@ CONFIG_ESP_LYRAT_V4_3_BOARD=y
 # CONFIG_ESP32_S2_KALUGA_1_V1_2_BOARD is not set
 # end of Audio HAL
 
+#
+# Custom Audio Board
+#
+# CONFIG_DAC_PCM51XX is not set
+# CONFIG_DAC_PCM5102A is not set
+# CONFIG_DAC_MA120 is not set
+# CONFIG_DAC_MA120X0 is not set
+CONFIG_DAC_ADAU1961=y
+
+#
+# DAC I2C control interface
+#
+CONFIG_DAC_I2C_SDA=12
+CONFIG_DAC_I2C_SCL=14
+CONFIG_DAC_I2C_ADDR=0x70
+# end of DAC I2C control interface
+
+#
+# I2S master interface
+#
+CONFIG_MASTER_I2S_MCLK_PIN=0
+CONFIG_MASTER_I2S_BCK_PIN=23
+CONFIG_MASTER_I2S_LRCK_PIN=13
+CONFIG_MASTER_I2S_DATAOUT_PIN=14
+# end of I2S master interface
+
+#
+# I2S slave interface
+#
+CONFIG_SLAVE_I2S_BCK_PIN=26
+CONFIG_SLAVE_I2S_LRCK_PIN=12
+CONFIG_SLAVE_I2S_DATAOUT_PIN=5
+# end of I2S slave interface
+# end of Custom Audio Board
+
 #
 # ESP32 DSP processor config
 #
-CONFIG_USE_DSP_PROCESSOR=y
-# CONFIG_SNAPCLIENT_DSP_FLOW_STEREO is not set
-# CONFIG_SNAPCLIENT_DSP_FLOW_BASSBOOST is not set
-# CONFIG_SNAPCLIENT_DSP_FLOW_BIAMP is not set
-CONFIG_SNAPCLIENT_DSP_FLOW_BASS_TREBLE_EQ=y
-CONFIG_USE_BIQUAD_ASM=y
-CONFIG_SNAPCLIENT_USE_SOFT_VOL=y
+# CONFIG_USE_DSP_PROCESSOR is not set
 # end of ESP32 DSP processor config
 
 #
 # Snapclient Ethernet Configuration
 #
-# CONFIG_SNAPCLIENT_ENABLE_ETHERNET is not set
+CONFIG_SNAPCLIENT_ENABLE_ETHERNET=y
+CONFIG_SNAPCLIENT_USE_INTERNAL_ETHERNET=y
+# CONFIG_SNAPCLIENT_USE_DM9051 is not set
+# CONFIG_SNAPCLIENT_USE_W5500 is not set
+# CONFIG_SNAPCLIENT_ETH_PHY_IP101 is not set
+# CONFIG_SNAPCLIENT_ETH_PHY_RTL8201 is not set
+CONFIG_SNAPCLIENT_ETH_PHY_LAN8720=y
+# CONFIG_SNAPCLIENT_ETH_PHY_DP83848 is not set
+# CONFIG_SNAPCLIENT_ETH_PHY_KSZ8041 is not set
+CONFIG_SNAPCLIENT_ETH_MDC_GPIO=23
+CONFIG_SNAPCLIENT_ETH_MDIO_GPIO=18
+CONFIG_SNAPCLIENT_ETH_PHY_RST_GPIO=17
+CONFIG_SNAPCLIENT_ETH_PHY_ADDR=0
 # end of Snapclient Ethernet Configuration
 
 #
@@ -561,9 +602,9 @@ CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
 # CONFIG_WIFI_LOG_DEFAULT_LEVEL_NONE is not set
 # CONFIG_WIFI_LOG_DEFAULT_LEVEL_ERROR is not set
 # CONFIG_WIFI_LOG_DEFAULT_LEVEL_WARN is not set
-# CONFIG_WIFI_LOG_DEFAULT_LEVEL_INFO is not set
+CONFIG_WIFI_LOG_DEFAULT_LEVEL_INFO=y
 # CONFIG_WIFI_LOG_DEFAULT_LEVEL_DEBUG is not set
-CONFIG_WIFI_LOG_DEFAULT_LEVEL_VERBOSE=y
+# CONFIG_WIFI_LOG_DEFAULT_LEVEL_VERBOSE is not set
 # CONFIG_ESP32_WIFI_IRAM_OPT is not set
 CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
 CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y