hexianglong/snapclient
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

wip

Browse Source
This commit is contained in:
Jorgen Kragh Jakobsen
2020-04-24 14:47:43 +02:00
Unverified
parent 7112c709ad
commit fb83ae5529
5 changed files with 111 additions and 105 deletions
Download Patch File Download Diff File Expand all files Collapse all files

126
components/MerusAudio/MerusAudio.c
View File

@@ -1,13 +1,13 @@
//
// MA120x0P ESP32 Driver
// MA120x0P ESP32 Driver
//
// Merus Audio - September 2018
// Written by Joergen Kragh Jakobsen, jkj@myrun.dk
//
// Register interface thrugh I2C for MA12070P and MA12040P
// Register interface thrugh I2C for MA12070P and MA12040P
// Support a single amplifier/i2c address
//
//
//
//
#include <stdio.h>
#include <stdint.h>
@@ -20,9 +20,9 @@
//#include "ma120_rev1_all.h"
#define MA_NENABLE_IO CONFIG_MA120X0_NENABLE_PIN
#define MA_ENABLE_IO CONFIG_MA120X0_ENABLE_PIN
#define MA_NMUTE_IO CONFIG_MA120X0_NMUTE_PIN
#define MA_NENABLE_IO CONFIG_MA120X0_NENABLE_PIN
#define MA_ENABLE_IO CONFIG_MA120X0_ENABLE_PIN
#define MA_NMUTE_IO CONFIG_MA120X0_NMUTE_PIN
#define MA_NERR_IO CONFIG_MA120X0_NERR_PIN
#define MA_NCLIP_IO CONFIG_MA120X0_NCLIP_PIN
@@ -64,26 +64,26 @@ void setup_ma120x0()
io_conf.pull_up_en = 0;
gpio_config(&io_conf);
gpio_set_level(MA_NMUTE_IO, 0);
gpio_set_level(MA_NENABLE_IO, 1);
i2c_master_init();
gpio_set_level(MA_NENABLE_IO, 0);
uint8_t res = ma_read_byte(MA120X0_ADDR,1,MA_hw_version__a);
printf("Hardware version: 0x%02x\n",res);
ma_write_byte(MA120X0_ADDR,1,MA_i2s_format__a,8); // Set i2s left justified, set audio_proc_enable
ma_write_byte(MA120X0_ADDR,1,MA_vol_db_master__a,0x50); // Set vol_db_master
ma_write_byte(MA120X0_ADDR,1,MA_vol_db_master__a,0x50); // Set vol_db_master
res = ma_read_byte(MA120X0_ADDR,1,MA_error__a);
res = ma_read_byte(MA120X0_ADDR,1,MA_error__a);
printf("Errors : 0x%02x\n",res);
res = 01; // get_MA_audio_in_mode_mon();
printf("Audio in mode : 0x%02x\n",res);
printf("Clear errors\n");
ma_write_byte(MA120X0_ADDR,1,45,0x34);
ma_write_byte(MA120X0_ADDR,1,45,0x30);
@@ -93,7 +93,7 @@ void setup_ma120x0()
printf("Unmute\n");
}
void setup_ma120()
void setup_ma120()
{
gpio_config_t io_conf;
@@ -102,17 +102,17 @@ void setup_ma120()
io_conf.pin_bit_mask = (1ULL<<MA_ENABLE_IO | 1ULL<<MA_NMUTE_IO );
io_conf.pull_down_en = 0;
io_conf.pull_up_en = 0;
printf("setup output %d %d \n",MA_ENABLE_IO, MA_NMUTE_IO);
gpio_config(&io_conf);
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_INPUT;
io_conf.pin_bit_mask = (1ULL<<MA_NCLIP_IO | 1ULL<<MA_NERR_IO );
io_conf.pull_down_en = 0;
io_conf.pull_up_en = 0;
printf("setup input %d %d \n",MA_NCLIP_IO, MA_NERR_IO);
gpio_config(&io_conf);
@@ -121,52 +121,52 @@ void setup_ma120()
gpio_set_level(MA_ENABLE_IO, 0);
i2c_master_init();
gpio_set_level(MA_ENABLE_IO, 1);
uint8_t res = ma_write_byte(0x20,2,1544,0);
res = ma_read_byte(0x20,2,1544);
res = ma_read_byte(0x20,2,1544);
printf("Hardware version: 0x%02x\n",res);
printf("Scan I2C bus: ");
for (uint8_t addr = 0x20; addr <= 0x23 ; addr++ )
{ res = ma_read_byte(addr,2,0);
printf(" 0x%02x => GEN2 ,",addr);
//printf("Scan i2c address 0x%02x read address 0 : 0x%02x \n", addr ,res);
}
printf("\n");
uint8_t rxbuf[32];
uint8_t otp[1024];
uint8_t rxbuf[32];
uint8_t otp[1024];
for (uint8_t i=0;i<16; i++)
{ ma_read(0x20,2,0x8000+i*32,rxbuf,32);
//printf("%04x : ",0x8000+i*32 );
for (uint8_t j=0; j<32 ; j++ )
{ otp[i*32+j] = rxbuf[j];
}
}
}
for (uint16_t i=0;i<16*32; i++)
{ if (i%32==0) {
printf("\n0x%04x : ",0x8000+i);
printf("\n0x%04x : ",0x8000+i);
}
printf("%02x ",otp[i]);
}
}
res = ma_write_byte(0x20,2,0x060c,0);
res = ma_read_byte(0x20,2,0x060c);
res = ma_read_byte(0x20,2,0x060c);
printf("\nHardware version: 0x%02x\n",res);
printf("\n");
}
uint8_t b[32];
#define CHECK(ADDR,L) ma_read(0x20,2,ADDR,b,L); printf("Check 0x%04x :",ADDR); for (int ci=0;ci<L;ci++) printf(" 0x%02x",b[ci]); printf("\n");
uint8_t b[32];
#define CHECK(ADDR,L) ma_read(0x20,2,ADDR,b,L); printf("Check 0x%04x :",ADDR); for (int ci=0;ci<L;ci++) printf(" 0x%02x",b[ci]); printf("\n");
void ma120_setup_audio(uint8_t i2c_addr)
{ uint8_t cmd[32];
//system("$SCOM w 0x0003 0x50 0x50 0x02");
{ uint8_t cmd[32];
//system("$SCOM w 0x0003 0x50 0x50 0x02");
cmd[0] = 0x50;
cmd[1] = 0x50;
cmd[2] = 0x02;
ma_write(i2c_addr,2,0x0003,cmd,3);
//CHECK(0x0003,3);
//CHECK(0x0003,3);
//system("$SCOM w 0x0015 0x12");
ma_write_byte(i2c_addr,2,0x0015, 0x12);
//CHECK(0x0015,1);
@@ -180,26 +180,26 @@ void ma120_setup_audio(uint8_t i2c_addr)
ma_write(i2c_addr,2,0x003d,cmd,2);
//CHECK(0x003d,2);
//system("$SCOM w 0x0040 0xf0 0x03");
cmd[0] = 0xf0;
cmd[0] = 0xf0;
cmd[1] = 0x03;
ma_write(i2c_addr,2,0x0040,cmd,2);
//CHECK(0x0040,2);
//system("$SCOM w 0x0043 0xf0 0x07");
cmd[0] = 0xf0;
cmd[0] = 0xf0;
cmd[1] = 0x07;
ma_write(i2c_addr,2,0x0043,cmd,2);
//CHECK(0x0043,2);
//system("$SCOM w 0x0079 0x9b");
ma_write_byte(i2c_addr,2,0x0079, 0x9b);
//CHECK(0x0079,1);
//system("$SCOM w 0x008e 0xef");
ma_write_byte(i2c_addr,2,0x008e, 0xef);
//CHECK(0x008e,1);
//system("$SCOM w 0x0090 0x20 0x32 0x45");
cmd[0] = 0x20;
cmd[1] = 0x32;
cmd[1] = 0x32;
cmd[2] = 0x45;
ma_write(i2c_addr,2,0x0090,cmd,3);
//CHECK(0x0090,3);
@@ -207,8 +207,8 @@ void ma120_setup_audio(uint8_t i2c_addr)
ma_write_byte(i2c_addr,2,0x00c0, 0x7c);
//CHECK(0x00c0,1);
//system("$SCOM w 0x00c3 0x07 0xff");
cmd[0] = 0x07;
cmd[1] = 0xff;
cmd[0] = 0x07;
cmd[1] = 0xff;
ma_write(i2c_addr,2,0x00c3,cmd,2);
//CHECK(0x00c3,2);
@@ -217,14 +217,14 @@ void ma120_setup_audio(uint8_t i2c_addr)
//CHECK(0x00d9,1);
//------------- not imp
//system("$SCOM w 0x00f0 0x00 0x00");
cmd[0] = 0x00;
cmd[1] = 0x00;
cmd[0] = 0x00;
cmd[1] = 0x00;
ma_write(i2c_addr,2,0x00f0,cmd,2);
//CHECK(0x00f0,2);
//system("$SCOM w 0x010f 0x0f 0x0f 0x64");
cmd[0] = 0x0f;
cmd[0] = 0x0f;
cmd[1] = 0x0f;
cmd[2] = 0x64;
cmd[2] = 0x64;
ma_write(i2c_addr,2,0x010f,cmd,3);
//CHECK(0x010f,3);
//system("$SCOM w 0x0140 0x5c");
@@ -232,16 +232,16 @@ void ma120_setup_audio(uint8_t i2c_addr)
//CHECK(0x0140,1);
//system("$SCOM w 0x0152 0x00 0x77 0x00");
cmd[0] = 0x00;
cmd[0] = 0x00;
cmd[1] = 0x77;
cmd[2] = 0x00;
cmd[2] = 0x00;
ma_write(i2c_addr,2,0x0152,cmd,3);
//CHECK(0x0152,3);
//system("$SCOM w 0x025d 0x0a");
ma_write_byte(i2c_addr,2,0x025d, 0x0a);
//CHECK(0x025d,1);
//system("$SCOM w 0x025f 0x4d");
ma_write_byte(i2c_addr,2,0x025f, 0x4d);
//CHECK(0x025f,1);
@@ -249,7 +249,7 @@ void ma120_setup_audio(uint8_t i2c_addr)
//system("$SCOM w 0x050b 0x3f");
ma_write_byte(i2c_addr,2,0x050b, 0x3f);
//CHECK(0x050b,1);
const char dsp0[16] = {0x10 ,0x00 ,0x40 ,0x00 ,0x13 ,0xb6 ,0x40 ,0x00 ,0x13 ,0x47 ,0x41 ,0x00 ,0x15 ,0x06 ,0x00 ,0x00};
const char dsp1[16] = {0x15 ,0x17 ,0x00 ,0x00 ,0x15 ,0x47 ,0x40 ,0x00 ,0x13 ,0x56 ,0x41 ,0x00 ,0x13 ,0x67 ,0x41 ,0x00};
const char dsp2[16] = {0x15 ,0x26 ,0x00 ,0x00 ,0x15 ,0x37 ,0x00 ,0x00 ,0x13 ,0x76 ,0x41 ,0x00 ,0x13 ,0x87 ,0x41 ,0x00};
@@ -262,41 +262,41 @@ void ma120_setup_audio(uint8_t i2c_addr)
//CHECK(0x1010,16);
//CHECK(0x1020,16);
//CHECK(0x1030,16);
//system("$SCOM w 0x1000 0x10 0x00 0x40 0x00 0x13 0xb6 0x40 0x00 0x13 0x47 0x41 0x00 0x15 0x06 0x00 0x00");
//system("$SCOM w 0x1010 0x15 0x17 0x00 0x00 0x15 0x47 0x40 0x00 0x13 0x56 0x41 0x00 0x13 0x67 0x41 0x00");
//system("$SCOM w 0x1020 0x15 0x26 0x00 0x00 0x15 0x37 0x00 0x00 0x13 0x76 0x41 0x00 0x13 0x87 0x41 0x00");
//system("$SCOM w 0x1030 0x15 0x46 0x00 0x00 0x15 0x57 0x00 0x00 0x10 0x30 0x40 0x00");
printf("Audio setup done\n");
ma_write_byte(0x20,2,0x608,0x33);
ma_write_byte(0x20,2,0x609,0);
ma_write_byte(0x20,2,0x609,0);
// ma_write_byte(0x20,2,513,0x11);
//ma_write_byte(i2c_addr,2,MA_core__test__d1_mux_sel__a, 0x03);
gpio_set_level(MA_NMUTE_IO, 0);
}
//var sys_err1_str = ['X','X','DSP3','DSP2','DSP1','DSP0','ERR','PVT_low'];
//var sys_err0_str = ['TW','AUD','CLK','PV_ov','PV_low','PV_uv','OTE','OTW'];
//const char * syserr1_str = { "X", "X", "DSP3","DSP2","DSP1","DSP0","ERR","PVT_low" } ;
//const char * syserr1_str = { "X", "X", "DSP3","DSP2","DSP1","DSP0","ERR","PVT_low" } ;
//const char * syserr0_str = { "TW","AUD","CLK","PV_ov","PV_low","PV_uv","OTE","OTW" } ;
void ma120_read_error(uint8_t i2c_addr)
{ //0x0118 error now ch0 [clip_stuck dc vcf_err ocp_severe ocp]
//0x0119 error now ch1 [clip_stuck dc vcf_err ocp_severe ocp]
{ //0x0118 error now ch0 [clip_stuck dc vcf_err ocp_severe ocp]
//0x0119 error now ch1 [clip_stuck dc vcf_err ocp_severe ocp]
//0x011a error now system [ AE CE ... ]
//0x011b error now system [DSP3 DSP2 DSP1 DSP0 OC OE]
//0x011c error acc ch0 [clip_stuck dc vcf_err ocp_severe ocp]
//0x011d error acc ch1 [clip_stuck dc vcf_err ocp_severe ocp]
//0x011c error acc ch0 [clip_stuck dc vcf_err ocp_severe ocp]
//0x011d error acc ch1 [clip_stuck dc vcf_err ocp_severe ocp]
//0x011e error acc system [7..0]
//0x011f error acc system [13..8]
uint8_t rxbuf[10] = {0};
char * l1;
uint8_t rxbuf[10] = {0};
char * l1;
l1 = malloc(40);
uint8_t res = 0xff ; // ma_read(i2c_addr,2,MA_core__prot_sys__errVect_now__errVector_ch0__a,rxbuf,8);
//for (int i = 0; i<=7;i++)
//{
//{
// printf("%d %s",i,((rxbuf[2] & (1<<i))==(1<<i)) ? sysstr0_str[i] : " ");
//}
@@ -304,9 +304,9 @@ void ma120_read_error(uint8_t i2c_addr)
printf("\nError vectors :");
for (int i = 0; i<8; i++)
{ printf("%02x ", rxbuf[i]);
}
}
printf("\n");
}
void i2c_master_init()
@@ -337,7 +337,7 @@ esp_err_t ma_write( uint8_t i2c_addr,uint8_t prot, uint16_t address, uint8_t *wb
{
i2c_master_write_byte(cmd, (uint8_t) address, ACK_VAL);
}
for (int i=0 ; i<n ; i++)
{ if (i==n-1) ack = NACK_VAL;
i2c_master_write_byte(cmd, wbuf[i], ack);