/*
 * ESPRESSIF MIT License
 *
 * Copyright (c) 2018 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
 *
 * Permission is hereby granted for use on all ESPRESSIF SYSTEMS products, in
 * which case, it is free of charge, to any person obtaining a copy of this
 * software and associated documentation files (the "Software"), to deal in the
 * Software without restriction, including without limitation the rights to use,
 * copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do
 * so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 */

#ifndef _DEV_WIFI_H_
#define _DEV_WIFI_H_

#include "esp_peripherals.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief      Peripheral Wi-Fi event id
 */
typedef enum {
  PERIPH_WIFI_UNCHANGE = 0,
  PERIPH_WIFI_CONNECTING,
  PERIPH_WIFI_CONNECTED,
  PERIPH_WIFI_DISCONNECTED,
  PERIPH_WIFI_SETTING,
  PERIPH_WIFI_CONFIG_DONE,
  PERIPH_WIFI_CONFIG_ERROR,
  PERIPH_WIFI_ERROR,
} periph_wifi_state_t;

/**
 * @brief   Wi-Fi setup mode type
 */
typedef enum {
  WIFI_CONFIG_ESPTOUCH,         /*!< Using smartconfig with ESPTOUCH protocol */
  WIFI_CONFIG_AIRKISS,          /*!< Using smartconfig with AIRKISS protocol */
  WIFI_CONFIG_ESPTOUCH_AIRKISS, /*!< Using smartconfig with ESPTOUCH_AIRKISS
                                   protocol */
  WIFI_CONFIG_WPS,              /*!< Using WPS (not support) */
  WIFI_CONFIG_BLUEFI,           /*!< Using BLUEFI*/
  WIFI_CONFIG_WEB,              /*!< Using HTTP Server (not support) */
} periph_wifi_config_mode_t;

/**
 * @brief   The WPA2 enterprise peripheral configuration
 */
typedef struct {
  bool diasble_wpa2_e;      /*!< Disable wpa2 enterprise */
  int eap_method;           /*!< TLS: 0, PEAP: 1, TTLS: 2 */
  char *ca_pem_start;       /*!< binary wpa2 ca pem start */
  char *ca_pem_end;         /*!< binary wpa2 ca pem end */
  char *wpa2_e_cert_start;  /*!< binary wpa2 cert start */
  char *wpa2_e_cert_end;    /*!< binary wpa2 cert end */
  char *wpa2_e_key_start;   /*!< binary wpa2 key start */
  char *wpa2_e_key_end;     /*!< binary wpa2 key end */
  const char *eap_id;       /*!< Identity in phase 1 of EAP procedure */
  const char *eap_username; /*!< Username for EAP method (PEAP and TTLS)  */
  const char *eap_password; /*!< Password for EAP method (PEAP and TTLS) */
} periph_wpa2_enterprise_cfg_t;

/**
 * @brief The Wi-Fi peripheral configuration
 */
typedef struct {
  bool disable_auto_reconnect; /*!< Disable Wi-Fi auto reconnect */
  int reconnect_timeout_ms; /*!< The reconnect timeout after disconnected from
                               Wi-Fi network */
  const char *ssid;         /*!< SSID of target AP */
  const char *password;     /*!< password of target AP */
  periph_wpa2_enterprise_cfg_t wpa2_e_cfg; /*!< wpa2 enterprise config */
} periph_wifi_cfg_t;

/**
 * @brief      Create the wifi peripheral handle for esp_peripherals
 *
 * @note       The handle was created by this function automatically destroy
 * when `esp_periph_destroy` is called
 *
 * @param      config  The configuration
 *
 * @return     The esp peripheral handle
 */
esp_periph_handle_t periph_wifi_init(periph_wifi_cfg_t *config);

/**
 * @brief      This function will block current thread (in `tick_to_wait` tick)
 * and wait until ESP32 connected to the Wi-Fi network, and got ip
 *
 * @param[in]  periph        The periph
 * @param[in]  tick_to_wait  The tick to wait
 *
 * @return
 *     - ESP_OK
 *     - ESP_FAIL
 */
esp_err_t periph_wifi_wait_for_connected(esp_periph_handle_t periph,
                                         TickType_t tick_to_wait);

/**
 * @brief      Check the Wi-Fi connection status
 *
 * @param[in]  periph  The periph
 *
 * @return     Wi-Fi network status
 */
periph_wifi_state_t periph_wifi_is_connected(esp_periph_handle_t periph);

/**
 * @brief      Set Wi-Fi listen interval for ESP32 station to receive beacon
 *
 * @param[in]  periph  The wifi periph
 * @param[in]  interval  listen interval. units: AP beacon intervals(see BcnInt,
 * default: 100ms)
 *
 * @return
 *     - ESP_OK
 *     - ESP_FAIL
 */
esp_err_t esp_wifi_set_listen_interval(esp_periph_handle_t periph,
                                       int interval);

/**
 * @brief      Start Wi-Fi network setup in `mode`
 *
 * @param[in]  periph   The periph
 * @param[in]  mode     The mode
 *
 * @return
 *     - ESP_OK
 *     - ESP_FAIL
 */
esp_err_t periph_wifi_config_start(esp_periph_handle_t periph,
                                   periph_wifi_config_mode_t mode);

/**
 * @brief      Wait for Wi-Fi setup done
 * @param[in]  periph        The periph
 * @param[in]  tick_to_wait  The tick to wait
 *
 * @return
 *     - ESP_OK
 *     - ESP_FAIL
 */
esp_err_t periph_wifi_config_wait_done(esp_periph_handle_t periph,
                                       TickType_t tick_to_wait);

#ifdef __cplusplus
}
#endif

#endif