snapclient/components/audio_hal/driver/es7243/es7243.c

/*
 * ESPRESSIF MIT License
 *
 * Copyright (c) 2019 <ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD>
 *
 * Permission is hereby granted for use on all ESPRESSIF SYSTEMS products, in
 * which case, it is free of charge, to any person obtaining a copy of this
 * software and associated documentation files (the "Software"), to deal in the
 * Software without restriction, including without limitation the rights to use,
 * copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do
 * so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 */

#include "es7243.h"

#include <string.h>

#include "board.h"
#include "esp_log.h"
#include "i2c_bus.h"

#define MCLK_PULSES_NUMBER (20)
#define ES_ASSERT(a, format, b, ...)      \
  if ((a) != 0) {                         \
    ESP_LOGE(TAG, format, ##__VA_ARGS__); \
    return b;                             \
  }

static char *TAG = "DRV7243";
static i2c_bus_handle_t i2c_handle;
static int es7243_addr = 0x26;

audio_hal_func_t AUDIO_CODEC_ES7243_DEFAULT_HANDLE = {
    .audio_codec_initialize = es7243_adc_init,
    .audio_codec_deinitialize = es7243_adc_deinit,
    .audio_codec_ctrl = es7243_adc_ctrl_state,
    .audio_codec_config_iface = es7243_adc_config_i2s,
    .audio_codec_set_mute = es7243_adc_set_voice_mute,
    .audio_codec_set_volume = es7243_adc_set_voice_volume,
    .audio_codec_get_volume = es7243_adc_get_voice_volume,
    .audio_codec_enable_pa = NULL,
    .audio_hal_lock = NULL,
    .handle = NULL,
};

static esp_err_t es7243_write_reg(uint8_t reg_add, uint8_t data) {
  return i2c_bus_write_bytes(i2c_handle, es7243_addr, &reg_add, sizeof(reg_add),
                             &data, sizeof(data));
}

static int i2c_init() {
  int res = 0;
  i2c_config_t es_i2c_cfg = {
      .mode = I2C_MODE_MASTER,
      .sda_pullup_en = GPIO_PULLUP_ENABLE,
      .scl_pullup_en = GPIO_PULLUP_ENABLE,
      .master.clk_speed = 100000,
  };
  res = get_i2c_pins(I2C_NUM_0, &es_i2c_cfg);
  ES_ASSERT(res, "getting i2c pins error", -1);
  i2c_handle = i2c_bus_create(I2C_NUM_0, &es_i2c_cfg);
  return res;
}

esp_err_t es7243_adc_set_addr(int addr) {
  es7243_addr = addr;
  return ESP_OK;
}

static esp_err_t es7243_mclk_active(uint8_t mclk_gpio) {
#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
  esp_rom_gpio_pad_select_gpio(mclk_gpio);
#else
  gpio_pad_select_gpio(mclk_gpio);
#endif
  gpio_set_direction(mclk_gpio, GPIO_MODE_OUTPUT);
  /*
      Before initializing es7243, it is necessary to output
      mclk to es7243 to activate the I2C configuration.
      So give some clocks to active es7243.
  */
  for (int i = 0; i < MCLK_PULSES_NUMBER; ++i) {
    gpio_set_level(mclk_gpio, 0);
    vTaskDelay(1 / portTICK_PERIOD_MS);
    gpio_set_level(mclk_gpio, 1);
    vTaskDelay(1 / portTICK_PERIOD_MS);
  }
  return ESP_OK;
}

esp_err_t es7243_adc_init(audio_hal_codec_config_t *codec_cfg) {
  esp_err_t ret = ESP_OK;
  es7243_mclk_active(get_es7243_mclk_gpio());
  i2c_init();
  ret |= es7243_write_reg(0x00, 0x01);
  ret |= es7243_write_reg(0x06, 0x00);
  ret |= es7243_write_reg(0x05, 0x1B);
  ret |= es7243_write_reg(0x01, 0x0C);
  ret |= es7243_write_reg(0x08, 0x43);
  ret |= es7243_write_reg(0x05, 0x13);
  if (ret) {
    ESP_LOGE(TAG, "Es7243 initialize failed!");
    return ESP_FAIL;
  }
  return ret;
}

esp_err_t es7243_adc_deinit(void) { return ESP_OK; }

esp_err_t es7243_adc_ctrl_state(audio_hal_codec_mode_t mode,
                                audio_hal_ctrl_t ctrl_state) {
  return ESP_OK;
}

esp_err_t es7243_adc_config_i2s(audio_hal_codec_mode_t mode,
                                audio_hal_codec_i2s_iface_t *iface) {
  return ESP_OK;
}

esp_err_t es7243_adc_set_voice_mute(bool mute) {
  ESP_LOGI(TAG, "Enter into es7243_mute(), mute = %d\n", mute);
  if (mute) {
    es7243_write_reg(0x05, 0x1B);
  } else {
    es7243_write_reg(0x05, 0x13);
  }
  return ESP_OK;
}

esp_err_t es7243_adc_set_voice_volume(int volume) {
  esp_err_t ret = ESP_OK;
  if (volume > 100) {
    volume = 100;
  }
  if (volume < 0) {
    volume = 0;
  }
  switch (volume) {
    case 0 ... 12:
      ret |= es7243_write_reg(0x08, 0x11);  // 1db
      break;
    case 13 ... 25:
      ret |= es7243_write_reg(0x08, 0x13);  // 3.5db
      break;
    case 26 ... 38:
      ret |= es7243_write_reg(0x08, 0x21);  // 18db
      break;
    case 39 ... 51:
      ret |= es7243_write_reg(0x08, 0x23);  // 20.5db
      break;
    case 52 ... 65:
      ret |= es7243_write_reg(0x08, 0x06);  // 22.5db
      break;
    case 66 ... 80:
      ret |= es7243_write_reg(0x08, 0x41);  // 24.5db
      break;
    case 81 ... 90:
      ret |= es7243_write_reg(0x08, 0x07);  // 25db
      break;
    case 91 ... 100:
      ret |= es7243_write_reg(0x08, 0x43);  // 27db
      break;
    default:
      break;
  }
  return ESP_OK;
}

esp_err_t es7243_adc_get_voice_volume(int *volume) { return ESP_OK; }