snapclient/components/audio_hal/driver/zl38063/api_lib/vproc_common.c

/****************************************************************************
 * vproc_common.c - Hal functions for the VPROC API
 *
 *
 ****************************************************************************
 * Copyright Microsemi Inc, 2018. All rights reserved.
 * Licensed under the MIT License. See LICENSE.txt in the project
 * root for license information.
 *
 ***************************************************************************/

#include "vproc_common.h"

#include <arpa/inet.h>
#include <stdio.h>

#include "audio_idf_version.h"
#include "board.h"
#include "driver/gpio.h"
#include "driver/spi_master.h"
#include "lwip/def.h"
#include "soc/gpio_struct.h"

#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 4))
#define SPI_HOST_NUM SPI2_HOST
#elif (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 0, 0))
#define SPI_HOST_NUM SPI3_HOST
#else
#define SPI_HOST_NUM HSPI_HOST
#endif

#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
#include "esp_rom_sys.h"
#endif

static spi_device_handle_t g_spi = NULL;

int VprocHALInit(void) {
  /*if the customer platform requires any init
   * then implement such init here.
   * Otherwise the implementation of this function is complete
   */
  esp_err_t ret = ESP_OK;

  spi_bus_config_t buscfg = {0};
  spi_device_interface_config_t devcfg = {
      .clock_speed_hz = 1000000,  // Clock out at 10 MHz
      .mode = 0,                  // SPI mode 0
      .queue_size = 6,            // queue 7 transactions at a time
  };

  get_spi_pins(&buscfg, &devcfg);
  // Initialize the SPI bus
  if (g_spi) {
    return ret;
  }
  ret = spi_bus_initialize(SPI_HOST_NUM, &buscfg, 0);
  assert(ret == ESP_OK);
  ret = spi_bus_add_device(SPI_HOST_NUM, &devcfg, &g_spi);
  assert(ret == ESP_OK);
  gpio_set_pull_mode(0, GPIO_FLOATING);
  return ret;
}

/*HAL clean up function - To close any open file connection
 * microsemi_spis_tw kernel char driver
 *
 * return: a positive integer value for success, a negative integer value for
 * failure
 */

void VprocHALcleanup(void) {
  /*if the customer platform requires any cleanup function
   * then implement such function here.
   * Otherwise the implementation of this function is complete
   */
  int ret = 0;
  ret = spi_bus_remove_device(g_spi);
  assert(ret == ESP_OK);
  ret = spi_bus_free(SPI_HOST_NUM);

  assert(ret == ESP_OK);
}
/*Note - These functions are PLATFORM SPECIFIC- They must be modified
 *       accordingly
 **********************************************************************/

/* Vproc_msDelay(): use this function to
 *     force a delay of specified time in resolution of milli-second
 *
 * Input Argument: time in unsigned 16-bit
 * Return: none
 */

void Vproc_msDelay(unsigned short time) {
#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
  esp_rom_delay_us(time * 1000);
#else
  ets_delay_us(time * 1000);
#endif
}

/* VprocWait(): use this function to
 *     force a delay of specified time in resolution of 125 micro-Seconds
 *
 * Input Argument: time in unsigned 32-bit
 * Return: none
 */
void VprocWait(unsigned long int time) {
#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
  esp_rom_delay_us(time * 1000);
#else
  ets_delay_us(time * 1000);
#endif
}

#define BIGENDIAN 1

/* This is the platform dependent low level spi
 * function to write 16-bit data to the ZL380xx device
 */
int VprocHALWrite(unsigned short val) {
  /*Note: Implement this as per your platform*/
  esp_err_t ret;
  spi_transaction_t t;
  unsigned short data = 0;
  memset(&t, 0, sizeof(t));  // Zero out the transaction
  t.length = sizeof(unsigned short) *
             8;  // Len is in bytes, transaction length is in bits.
#if BIGENDIAN
  data = htons(val);
  t.tx_buffer = &data;  // Data
#else
  t.tx_buffer = &val;
#endif
  ret = spi_device_transmit(g_spi, &t);  // Transmit
  assert(ret == ESP_OK);

  return 0;
}

/* This is the platform dependent low level spi
 * function to read 16-bit data from the ZL380xx device
 */
int VprocHALRead(unsigned short *pVal) {
  /*Note: Implement this as per your platform*/
  esp_err_t ret;
  spi_transaction_t t;
  unsigned short data = 0;

  memset(&t, 0, sizeof(t));  // Zero out the transaction
  t.length = sizeof(unsigned short) * 8;
  t.rxlength = sizeof(unsigned short) *
               8;  // The unit of len is byte, and the unit of length is bit.
  t.rx_buffer = &data;
  ret = spi_device_transmit(g_spi, &t);  // Transmit!
#if BIGENDIAN
  *pVal = ntohs(data);
#else
  *pVal = data;
#endif
  assert(ret == ESP_OK);

  return 0;
}